Swppp Drafter
v0.1.0Use when a civil engineer, Qualified SWPPP Developer (QSD), Qualified SWPPP Practitioner (QSP), erosion-control designer, environmental consultant, or construction-operator representative needs to convert a single construction project's location, disturbed acreage, soils, slopes, receiving waters, sequence of construction, and planned BMP set into a DRAFT Stormwater Pollution Prevention Plan (SWPPP) aligned to the EPA 2022 Construction General Permit (CGP) — or to the equivalent state CGP when the user names it — before NOI submittal. Guides scoped intake of the permit framework, project, operator(s), site assessment (soils / HSG, slopes, sensitive features, receiving waters and 303(d) / TMDL status), sequence-of-construction with phasing and final-stabilization dates, planned BMPs, and non-sediment pollutant sources (concrete washout, fuel / oil, sanitary, paint / stucco, fertilizer / pesticide, debris, dewatering), builds an Erosion / Sediment / Pollution-Prevention / Post-Construction BMP selection matrix tied to site conditions, sets the inspection-and-corrective-action schedule and signatory block per 40 CFR 122.22, flags numeric-effluent-limit (NEL), dewatering-discharge, and impaired-waters / TMDL requirements, and produces a DRAFT SWPPP with a recordkeeping framework and an unresolved-information list — for QSD / QSP / licensed PE review and sign-off. Never submits an NOI, never signs or seals the SWPPP, never replaces site-specific drawings or calculations or the registered design professional's seal, never opines on permit issuance, never substitutes for the operator's permit responsibility, never overrides the AHJ or state permitting agency.
by